Research

/Research
Research 2018-04-04T17:49:33+00:00

Research@SJCET Palai

SJCET Palai enables faculty to work to their full potential by providing facilities for research which in turn enrich their teaching. SJCET Palai provides an environment conducive for research where faculty and students continuously update their knowledge. Several research projects are in progress which are funded by DST, AICTE

Dr. Jalumedi Babu

Professor & Dean of Research

Dr. Rajesh Baby

Approved Guide

PhD in Mechanical Engineering

The college is Research Centre of APJ Abdul Kalam Technological University (KTU).Candidates qualifying the KTU’s Entrance procedure can join for Ph.D under the approved guide in the college

Funded Projects

Dr. Rajesh Baby, Associate Professor of ME Dept. received a funding of Rs. 1.2 Lakhs for the project titled ‘Experimental Investigations and Performance Optimization of the Bipolar Plates of Proton Exchange Membrane Fuel Cells’ under the APJ-KTU-CERD Research Seed Money Scheme.

Prof. Tom Zacharia has been awarded a funding of Rs. 27 Lakhs from DST under the scheme IDP (Industrial Development Scheme) for his work on ‘Design and
Fabrication of Extrusion Machine’. This is a first time achievement among all engineering colleges in Kerala.

Publications

  • Mr. Justin Joseph published a paper ”A polynomial model for the adaptive computation of threshold of gradient modulus in 2D anisotropic diffusion filter”, Optik-International Journal for Light and Electron Optics, 2018.
  • Mr. Bino Thomas has presented a paper titled “Cooperative Game Theoretical Approach for Efficient Node Discovery in Mesh Network with Bloom Filter” at the International Conference on Industrial Electronics and Computer Science (ICIECS) on 24th September 2017.
  • P. Arun, S. A. Lincon and N. Prabhakaran, “Reliability of Using Characteristic Frequency Components for the Detection and Characterization of Bearing Faults ”, Procedia computer science, Vol.115, pp. 740-747, Sep. 2017.
  • P. Arun, S. A. Lincon and N. Prabhakaran, “Detection and Characterization of Bearing Faults from the Frequency Domain Features of Vibration”, IETE Journal of research, Pages 1-14, Sep. 2017.
  • P. Arun, S. A. Lincon and N. Prabhakaran, “An Automated Method for the Analysis of Bearing Vibration Based on Spectrogram Pattern Matching”, Journal of applied research and technology.
  • J.Babu , Jose Philip and J.PauloDavim“Machining defects in Green Composites” in a Research Book “Green Composites” Edited by J.PauloDavim- De-Gruyter Publishers- Germany ISBN 978-3-11-043578-8-Sep-2017
  • J.Babu , Ajith James , Jose Philip and Shankar Charaborty, Application of the grey-based fuzzy logic approach for materials selection” International Journal of Materials Research, Hanser Publishers, Germany , DOI 10.3139/146.111538. 108 (9) 2017 pp 702-709
  • Jilse. Sebastian, C. Muraleedharan, and A. Santhiagu, “Enzyme catalyzed biodiesel production from rubber seed oil containing high free fatty acid,” International Journal of Green Energy, vol. 14, no. 8, pp. 687–693, 2017.
  • Jilse Sebastian, Vipin V C, C Muraleedharan, A. Santhiagu, “Enzymatic Transesterification of Rubber Seed Oil Using Candida antactica lipase B,” Journal of Advanced Engineering & Research, vol. 4, no. 2, pp. 104–108, 2017.

  • Mr. Sarju S and Athira mol S, published a paper in “The board of e-Journal for Research” on “A Survey on Data Anonymization for Big Data Security” Vol.3 Issue 1, March 2017.
  • Mrs. Praseetha V.M published a paper in International Journal of Computers (JCP) on “Mobile-Cloudlet Face Recognition: Two different Approaches” ISSN: 1796-203X Vol. 13 No.1, January 2017.

  • Mr. Arun Madhu and Ms. Minu T Lalson , published a paper in “International Journal of Science & Engineering Development Research” on “Topic Discovery and Opinion Mining from Twitter data” Vol.2 Issue 6, June 2017.
  • Mr. Sarju S and Athira mol S, published a paper in “International Journal of Computer & Mathematical Science” on “A Scalable Approach for Anonymization prior to Data Publishing using Top Down Specialisation and Randomisation: A Security Perspective” ISSN 2347-8527
  • Mr. Kishore Sebastian and Ms. Minu T Lalson , has been submitted and selected a paper entitled “Rare topic discovery and user behaviour Analysis on Document Streams in Social Media” for presentation for International Conference ICIEEE-2017 on 20th May 2017.
  • Published a research paper in International Journal of Green Energy (Taylor & Francis Publishers) Jilse Sebastian, C. Muraleedharan, and A. Santhiagu, “Enzyme catalyzed biodiesel production from rubber seed oil containing high free fatty acid,” International Journal of Green Energy, vol. 14, no. 8, pp. 687–693, 2017.
  • Prof. Jilse Sebastian presented paper and published in proceedings of International Conference cum Exhibition on Renewable and Sustainable Energy held at Hindustan College of Engineering & Technology, Coimbatore.
  • Pankaj, Jilse Sebastian, C Muraleedharan and A Santhiagu, “Influence of temperature on chemical kinetics of alkali transesterification of rubber seed oil”, Proceedings of International Conference cum Exhibition on Renewable and Sustainable Energy (ICRSE-2017), Coimbatore, India, April 12-13, 2017.

  • P.Shailesh, K. Vijay Kumar J. Babu, K.Srinivasa Raghavan.”Evaluation of strain and strain rates at different stages of Superplastic cone forming” in Materials Today Proceeding’s 2017 (4) 835–841, Elsevier Publications.
  • J. Babu, Tom sunny, Jose Philip, Sukhwinder K. Bhullar, A Digital image analysis to evaluate delamination factor after drilling GFRP composites using a Kevlar drill bit in Indian Journal of Science & Technology 9 (S1) 2016 : 1-7, DOI: 10.17485/ijst/2016/v9iS1/85749.
  • J.Babu, Athra Tulasidas “Formation of Bio-active gel from Bio-waste” accepted for publication, SJCET Journal of Engineering and Management, 2017, 10(1):20-25.
  • J. Babu, Ajith James, Varchy chen, “Optimisation and selection of forming depth and pressure of box shaped Superplastic forming using grey based fuzzy logic” presented at International Conference on Recent Advances in Materials, Mechanical and Civil Engineering, June 1nd-2nd 2017, Marri Laxman Reddy Institute of Technology and Management, Hyderabad , Telangana. Proceedings will be published Material Science and Engineering -IOP Science- ISSN: 1757-8981
  • Sujin S Bose, J. Babu , B. Girinath , Turning of Hard steels- A Review, presented at International Conference on Recent Advances in Materials, Mechanical and Civil Engineering, June 1nd-2nd 2017 at Marri Laxman Reddy Institute of Technology and Management, Hyderabad , Telangana. Proceedings will be published in Material Science and Engineering -IOP Science- ISSN: 1757-8981
  • Jose Tom Tharappel, J. Babu, “Welding processes for Inconel 718- A brief review” presented at International Conference on Recent Advances in Materials, Mechanical and Civil Engineering, June 1nd-2nd 2017, Marri Laxman Reddy Institute of Technology and Management, Hyderabad , Telangana. Proceedings will be published Material Science and Engineering -IOP Science- ISSN: 1757-8981
  • Dr. Rajesh Baby presented a technical paper entitled “EFFECT OF BIPOLAR PLATE FLOW CHANNEL ON THE PERFORMANCE OF A PROTON EXCHANGE MEMBRANE FUEL CELL: A NUMERICAL STUDY” authored by Juvan Josias Thattil, Sanson Regi Mathew, Vyshak S (B.Tech Students 2013-17 batch) and Rajesh Baby presented and published in the ICHMT International Symposium on Advances in Computational Heat Transfer held from May 28 to June 1, 2017,Napoli, Italy.
  • Dr. Lijo Paul has presented paper on” Effect of Powder Mixed Electrolyte in ECDM Process” at International Conference of Materials, Manufacturing and Modelling-ICMMM 2017 , VIT, Vellore, 9-11 March, 2017
  • Dr. Lijo Paul has presented paper on” Thermal Analysis for Material Removal Rate in Micro EDM Process ” at International Conference of Materials, Manufacturing and Modelling-ICMMM 2017 , VIT, Vellore, 9-11 March, 2017.
  • Dr. Lijo Paul and Mr. Ivin Jose has presented paper on” Micro Machining in ECDM Process with Tool Modification ” at International Conference of Materials, Manufacturing and Modelling-ICMMM 2017 , VIT, Vellore, 9-11 March, 2017.
  • Dr. Lijo Paul and Mr. Don George has presented paper on” Effect of preheating of electrolyte in micro ECDM process ” at International Conference of Materials, Manufacturing and Modelling-ICMMM 2017 , VIT, Vellore, 9-11 March, 2017.
  • Dr. Lijo Paul and Mr. Sachin Jose has presented paper on” Experimental study on Abrasive Jet Drilling on Glass” at International Conference of Materials, Manufacturing and Modelling-ICMMM 2017 , VIT, Vellore, 9-11 March, 2017.
  • Dr. Lijo Paul and Mr. Pradeep  P V has presented paper on” FEM of ECDM process on Semi conducting materials” at Recent Advances in Materials, Mechanical and Civil Engineering ICRAMMCE-2017 , Marri Laxman Reddy Institute of Technology and Management, Hyderabad, June 1, 2017.

  • Dr. Lijo Paul and Mr. Bibin P George has presented paper on” Characterisation of Micro Channels Machined with ECDM for Fluidic Applications” at Recent Advances in Materials, Mechanical and Civil Engineering ICRAMMCE-2017 , Marri Laxman Reddy Institute of Technology and Management, Hyderabad, June 1, 2017.
X